Avaya XT Series XT5000 Series XT4000 Series User Manual page 26

Getting Started
Pairing an XT Remote Control Unit
About this task
If you have multiple XT Series units in the same room, you can pair a XT Remote Control Unit with
its XT Codec Unit so that every unit has its dedicated remote, so when you press a key on a
remote, it triggers an action on the correct XT Series unit. Enter the same numeric code in both
the XT Series and its XT Remote Control Unit to pair them. By default all remotes and endpoints
use the same code 01.
Procedure
1. Access the general settings. From the XT Series web interface, select Basic Settings >
General. From the endpoint's main menu, select Configure > General.
You can use the XT Remote Control Unit's initial default pairing to perform this task.
2. Enter a two-digit numeric code between 01 and 96 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the Simplified XT Remote Control Unit, press the * and # keys simultaneously until its
RED light blinks twice. On the advanced remote control unit, press the RED and GREEN
keys simultaneously until the GREEN light becomes RED.
June 2019
Figure 12: General Settings
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
26