Avaya XT Series XT5000 Series XT4000 Series User Manual page 24

Getting Started
During a videoconference, you can send DTMF tones via the keypad. DTMF is often used to
communicate with an MCU or other device which accepts DTMF commands. For example, to
display the DTMF menu in a call hosted on the Scopia Elite MCU or the Equinox Conferencing
Media Server, press * at any time. For more information, see User Guide for Scopia Elite MCU.
Some additional shortcuts from the XT Remote Control Unit include:
• Press and hold a number key to recall a camera preset (0-9).
• [XTE240] In the Layouts page, press the 'near/far' key to switch between your computer and
the remote computer.
• [XTE240] Press and hold Inputs to toggle between your computer and the remote content,
when receiving a presentation.
Table 2: Remote Control Shortcuts
Keyboard
Esc
F1
F2, F6
F3
June 2019
Figure 11: Entry method displayed to the right of an input field
Simplified Remote
Control
Back
--
Layouts
Far/Near
Avaya IX Video Conferencing XT Series User Guide
Comments on this document? infodev@avaya.com
Advanced Remote
Control
Back
Help
Pip
Far/Near
Notes/Tips
To move the current
camera when you are in
the main menu, press C
or Back. Press C again
to access the main
menu.
For example, you can
see the remote video in
a big window and your
local video in a smaller
window.
Far/Near switches
between the local and
remote cameras. For
example, when the Far
icon appears, all inputs,
presets, and camera
movements are directed
towards the far camera
and far active speaker.
Table continues...
24