Ruckus Wireless SmartCell Gateway 200 Reference Manual page 53

SNMP Configuration and Standard MIB and OID
SNMP Agent for APs
Using the controller interface navigate to Configuration > AP Zones > AP Group.
Click AP SNMP Options and enable the Override option for a AP Group as seen in
Figure 9.
Figure 9. Setting the Override option for a AP Group
Using the controller interface navigate to Configuration > AP Zone > Zone
Template > AP Groups. Click on AP SNMP Options and enable the Override
option for Zone Template AP Groups as seen in Figure 10.
53
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A