Rfc1213 Mib (Rfc1213); Decoding Traps - Ruckus Wireless SmartCell Gateway 200 Reference Manual

RFC1213 MIB (RFC1213)

RFC1213-MIB (RFC1213) defines the second version of the management informa-
tion base (MIB-II) for use with network management protocols on TCP/IP- based
Internets. This RFC specifies an IAB standards track protocol for the Internet
community, and requests discussion and suggestions for improvements.
NOTE: To get network information use the OID.1.3.6.1.2.1.2.2.
NOTE: For more information about RFC1213-MIB (RFC1213), refer to the current
edition of the "IAB Official Protocol Standards" for the standardization state and
status of this protocol. Distribution of this memo is unlimited.
Ruckus Wireless private MIBs are categorized into the following types:
• Ruckus Event MIB
• Ruckus System MIB
• Ruckus WLAN MIB
• Ruckus TTG MIB
• SmartZone Event Traps

Decoding Traps

To extract the variable bindings from the trap, it is recommended to use the OID (of
the variables) instead of their positions. The reason is that the OID never changes
while the position may change when additional variables are added to the trap. For
example, the ruckusSCGSystemMiscEventTrap trap may originally contain the
following four variable bindings:
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGEventDescription
ruckusSCGEventCode
Assuming in a future release, a new variable binding - ruckusSCGEventReason, is
added to this trap, then ruckusSCGSystemMiscEventTrap trap will have the
following five variable bindings:
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGEventReason
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
SNMP Configuration and Standard MIB and OID
Decoding Traps
46