Ruckus Wireless SmartCell Gateway 200 Reference Manual page 47

ruckusSCGEventDescription
ruckusSCGEventCode
If the variable bindings are extracted based on the position, the original logic fails
when the binding - ruckusSCGEventReason is added.
Though a newly-added variable binding is normally added at the end of the existing
binding, sometimes it may placed in the middle to make it consistent with other
traps.
NOTE: For details on variable OIDs refer to
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
SNMP Configuration and Standard MIB and OID
Ruckus Event Object.
Decoding Traps
47