Ruckus Scg Client Information; Ruckusctrlclientmac; Ruckusctrlclientstatus - Ruckus Wireless SmartCell Gateway 200 Reference Manual

Ruckus SCG Client Information

The following are the MIBs for client information nodes. These MIBs indicate
information on the user equipment's MAC address and status. Operators would
need to append the user equipment's MAC address to the string length of 6 (decimal
format) as index after each OID to get the required information.
For MAC address of C8:AA:7C:8E:67:C4, it must be translated to equivalent
decimal value of
For example, use the following command to get the status of the client (with MAC
C8:AA:7C:8E:67:C4):
snmpget -v2c -c public <ip_addr> RUCKUS-CTRL-MIB::ruck-
usCtrlClientStatus.6.202.170.124.142.103.196
NOTE: Length of the string index should always be 6.
Read only indicates that the particular SNMP set will not be supported.
•

ruckusCtrlClientMac

•

ruckusCtrlClientStatus

ruckusCtrlClientMac
Table 436. ruckusCtrlClientMac
Object Name
Parent Node
Object Identifier
Description
ruckusCtrlClientStatus
Table 437. ruckusCtrlClientStatus
Object Name
Parent Node
Object Identifier
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
202.170.124.142.103.196
ruckusCtrlClientMac (read only)
ruckusCtrlClientTable
.1.3.6.1.4.1.25053.1.8.1.1.1.2.8.1.1
MAC address of the user equipment
ruckusCtrlClientStatus (read only)
ruckusCtrlClientTable
.1.3.6.1.4.1.25053.1.8.1.1.1.2.8.1.20
Ruckus SCG Client Information
for the query.
Ruckus WLAN MIB
321