Ruckusscgdiskusagethresholdexceededtrap - Ruckus Wireless SmartCell Gateway 200 Reference Manual

Table 11. ruckusSCGMemoryUsageThresholdExceededTrap
Description
Generated by Event
Code
Cleared by SNMP Trap
Cleared by Matching

ruckusSCGDiskUsageThresholdExceededTrap

Table 12. ruckusSCGDiskUsageThresholdExceededTrap
Object Name
Parent Node
Object Identifier
Trap Severity
Bindings
Description
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
Triggered by the controller memory threshold exceeded event. The
usage percentage can be configured as 60% to 90%. This trap will be
sent if the usage percentage exceeds the configured threshold.
Configuration > SCG /vSZ-H System > Event
Navigate to
Threshold to define memory usage threshold.
The event severity, event type, node name, MAC IP address, memory
usage percent and event code are displayed.
951:memoryThresholdExceeded
This SNMP trap is cleared by
ruckusSCGMemoryUsageThresholdBackToNormalTrap
(.1.3.6.1.4.1.25053.2.10.1.43)
ruckusSCGEventMacAddr (.1.3.6.1.4.1.25053.2.10.2.20.0)
ruckusSCGDiskUsageThresholdExceededTrap
ruckusSCGEventTraps (RUCKUS-EVENT-MIB)
.1.3.6.1.4.1.25053.2.10.1.8
Critical
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGEventNodeName
ruckusSCGEventMacAddr
ruckusSCGDiskPerc
ruckusSCGEventCode
Triggered when there is a controller disk usage threshold exceeded
event. The usage percentage can be configured as 60% to 90%. This
trap will be sent if the usage percentage exceeds the configured
threshold. Navigate to
Event Threshold to define disk usage threshold.
The event severity, event type, node name, MAC IP address, disk usage
percent and event code are displayed.
Configuration > SCG/vSZ-H System >
Ruckus Event MIB
Ruckus Event Trap
76