Standard Mib; Host Resource Mib; Ucd Mib; Snmpv2 Mib (Rfc3418) - Ruckus Wireless SmartCell Gateway 200 Reference Manual

Standard MIB

Standard MIBs that the controller supports include:
•

Host Resource MIB

•

UCD MIB

•

SNMPv2 MIB (RFC3418)

• RFC1213 MIB (RFC1213)
Host Resource MIB
Host resource MIB is a standard MIB for monitoring the resource status on
controller. The term "host" refers to any computer that communicates with other
similar computers attached to the Internet and that is directly used by one or more
users.
NOTE: To get disk information use the Host Resource MIB OID.1.3.6.1.2.1.25.2.3.
UCD MIB
The UCD SNMP MIB contains system performance data, which was designed for
ease of numerical management routines. This MIB is no longer maintained by the
University of California. It is now on life support-mode and maintained by the NET-
SNMP project.
• To get CPU information use the UCD SNM MIB OIDs.
• .1.3.6.1.4.1.2021.10.1.3.1 (1 minute load)
• .1.3.6.1.4.1.2021.10.1.3.2 (5 minute load)
• .1.3.6.1.4.1.2021.10.1.3.3 (15 minute load)
• To get memory information use the OID.1.3.6.1.4.1.2021.4
SNMPv2 MIB (RFC3418)
SNMPv2-MIB (RFC3418) defines managed objects that describe the behavior of a
Simple Network Management Protocol (SNMP) entity.
NOTE: RFC3418 obsoletes RFC1907 – the management information base for v2
of the Simple Network Management Protocol (SNMPv2).
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
SNMP Configuration and Standard MIB and OID
Standard MIB
45