Ruckusscgipmiretemppstrap - Ruckus Wireless SmartCell Gateway 200 Reference Manual
Snmp mib for smartzone 3.4
Hide thumbs
Also See for SmartCell Gateway 200:
- Command line interface reference manual (583 pages) ,
- Getting started manual (104 pages) ,
- Reference manual (39 pages)
Table of Contents
Advertisement
Table 139. ruckusSCGIpmiRETempMemPTrap
Description
Generated by Event
Code
ruckusSCGIpmiRETempPSTrap
Table 140. ruckusSCGIpmiRETempPSTrap
Object Name
Parent Node
Object Identifier
Trap Severity
Bindings
Description
Generated by Event
Code
NOTE:
Traps .1.3.6.1.4.1.25053.2.11.1.250 to .1.3.6.1.4.1.25053.2.11.1.277 are not
applicable for vSZ-H.
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
Triggered by the event where the processor memory temperature status
recovers to normal condition. The event severity, event type, processor
ID, temperature status, controller node MAC IP address and event code
are displayed.
930:ipmiREThempMemP
ruckusSCGIpmiRETempPSTrap
ruckusSCGEventTraps (RUCKUS-EVENT-MIB)
.1.3.6.1.4.1.25053.2.10.1.269
Informational
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGPsId
ruckusSCGTemperatureStatus
ruckusSCGEventMacAddr
ruckusSCGEventCode
Triggered by the event where the power supply temperature status
recovers to normal condition. The event severity, event type, power
supply ID, temperature status, controller node MAC IP address and
event code are displayed.
931:ipmiREThempPS
Ruckus Event MIB
Ruckus Event Trap
173
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?