Ruckusscgassoccantstarttrap - Ruckus Wireless SmartCell Gateway 200 Reference Manual
Snmp mib for smartzone 3.4
Hide thumbs
Also See for SmartCell Gateway 200:
- Command line interface reference manual (583 pages) ,
- Getting started manual (104 pages) ,
- Reference manual (39 pages)
Table of Contents
Advertisement
ruckusSCGAssocCantStartTrap
Table 177. ruckusSCGAssocCantStartTrap
Object Name
Parent Node
Object Identifier
Trap Severity
Bindings
Description
Generated by Event
Code
Cleared by SNMP Trap
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
ruckusSCGAssocCantStartTrap
ruckusSCGEventTraps (RUCKUS-EVENT-MIB)
.1.3.6.1.4.1.25053.2.10.1.326
Critical
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGSrcIP
ruckusSCGSrcPort
ruckusSCGDestIP
ruckusSCGDestPort
ruckusSCGEventMacAddr
ruckusSCGEventCode
Triggered when a client does not initiate the association request after
successful authentication. The event severity, event type, source IP
address, source port, destination IP address, destination port, controller
node MAC IP address and event code are displayed.
1626:assocCantStart
This SNMP trap is cleared by
(.1.3.6.1.4.1.25053.2.10.1.353)
ruckusSCGAssocUpTrap
Ruckus Event MIB
Ruckus Event Trap
201
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?
Questions and answers