Ruckusscgcmresetfactorybyusertrap - Ruckus Wireless SmartCell Gateway 200 Reference Manual
Snmp mib for smartzone 3.4
Hide thumbs
Also See for SmartCell Gateway 200:
- Command line interface reference manual (583 pages) ,
- Getting started manual (104 pages) ,
- Reference manual (39 pages)
Table of Contents
Advertisement
ruckusSCGCMResetFactoryByUserTrap
Table 42. ruckusSCGCMResetFactoryByUserTrap
Object Name
Parent Node
Object Identifier
Trap Severity
Bindings
Description
Generated by Event
Code
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
ruckusSCGCMResetFactoryByUserTrap
ruckusSCGEventTraps (RUCKUS-EVENT-MIB)
.1.3.6.1.4.1.25053.2.10.1.48
Informational
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGEventAPName
ruckusSCGEventAPMacAddr
ruckusSCGEventAPIP
ruckusSCGEventAPLocation
ruckusSCGEventAPDescription
ruckusSCGEventAPGPSCoordinates
ruckusSCGEventZoneName
ruckusSCGEventReason
ruckusSCGEventCode
ruckusSCGEventAPIPv6
Triggered by the event where the AP cable modem is set to factory
default by the user. The event severity, event type, AP name, AP MAC
address, AP IP address, AP location, AP description, AP GPS
coordinates, zone name, event reason, event code and AP IPv6 address
are displayed.
327:cmResetFactoryByUser
Ruckus Event MIB
Ruckus Event Trap
105
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?
Questions and answers