Ruckusscgaplbsnoresponsestrap - Ruckus Wireless SmartCell Gateway 200 Reference Manual
Snmp mib for smartzone 3.4
Hide thumbs
Also See for SmartCell Gateway 200:
- Command line interface reference manual (583 pages) ,
- Getting started manual (104 pages) ,
- Reference manual (39 pages)
Table of Contents
Advertisement
ruckusSCGAPLBSNoResponsesTrap
Table 49. ruckusSCGAPLBSNoResponsesTrap
Object Name
Parent Node
Object Identifier
Trap Severity
Bindings
Description
Generated by Event
Code
SCG-200 and vSZ-H SNMP Reference Guide for SmartZone 3.4, 800-71175-001 Rev A
ruckusSCGAPLBSNoResponsesTrap
ruckusSCGEventTraps (RUCKUS-EVENT-MIB)
.1.3.6.1.4.1.25053.2.10.1.56
Major
ruckusSCGEventSeverity
ruckusSCGEventType
ruckusSCGEventAPName
ruckusSCGEventAPMacAddr
ruckusSCGEventAPIP
ruckusSCGEventAPLocation
ruckusSCGEventAPDescription
ruckusSCGEventAPGPSCoordinates
ruckusSCGEventZoneName
ruckusSCGLBSURL
ruckusSCGLBSPort
ruckusSCGEventCode
ruckusSCGEventAPIPv6
Triggered when an event is raised since the LS fails to respond to the
connecting AP. The event severity, event type, AP name, AP MAC
address, AP IP address, AP location, AP description, AP GPS
coordinates, zone name, LBS server URL, LBS port, event code and
AP IPv6 address.
701:apLBSNoResponses
Ruckus Event MIB
Ruckus Event Trap
112
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?
Questions and answers