Table of Contents
Advertisement
10.2.5
General - Display of actual temperature
Options:
If the actual temperature is to be shown on the display, the parameter must be set on active.
The device will then primarily display the actual temperature. When actuating the control
element the display changes to the setpoint adjustment. After non-actuation of the control
element the current actual temperature again appears in the display after the set waiting period.
10.2.6
General - Waiting period for display of actual temperature
Options:
After non-actuation of the control element the current actual temperature again appears in the
display after the set waiting period.
10.2.7
General - Display of actual temperature in eco mode
Options:
If the actual temperature is to be shown in ECO mode on the display, the parameter must be set
on active. The device will then primarily display the actual temperature. When actuating the
control element the display changes to the setpoint adjustment. After non-actuation of the
control element the current actual temperature again appears in the display after the set waiting
period.
KNX Technical Reference Manual 1473-1-8914 / 2CKA001473B8914
Description of application and parameters
No
Yes
5 s
10 s
20 s
30 s
1 min.
2 min.
4 min.
No
Yes
Application "Control settings"
│72
Advertisement
Table of Contents
