Table of Contents
Advertisement
8.3.5
Changing the operating status (heating/cooling)
Fig. 11: Operating status
heating/cooling
When the control function "Heating" and/or "Cooling" is activated, the currently set operating
status is indicated in the display.
KNX Technical Reference Manual 1473-1-8914 / 2CKA001473B8914
1. Keep the button [3] pressed until the display flashes.
2. Press button [3] again several times until function
"Operating status" appears.
3. Select the desired operating status with buttons [2] and
[4].
After an adjustable time the device jumps back into the
mode that was active before the adjustment of the
operating status, e.g. into comfort operation. The
adjustment is stored.
Operation
│27
Advertisement
Table of Contents
