Table of Contents
Advertisement
10.3.35 On/Off request
Number
34
This 1-bit communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
10.3.36 Setpoint display
Number
35
This 2-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
10.3.37 Request setpoint
Number
36
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
10.3.38 Confirm setpoint
Number
37
This 1-byte communication object must be connected to the respective slave communication
object in order to synchronise the devices in the master/slave configuration.
KNX Technical Reference Manual 1473-1-8914 / 2CKA001473B8914
Description of application and parameters
Name
1. On/off request (master)
2. On/off request (slave)
Name
1. Set value display (master)
2. Set value display (slave)
Name
1. Request set value (master)
2. Request set value (slave)
Name
1. Confirm set value (master)
2. Confirm set value (slave)
Communication objects - RTC
Object function
Input
Input
Object function
Input / output
Input / output
Object function
Input
Input
Object function
Input / output
Input / output
Data type
Switching
Switching
Data type
2-byte floating point
value
2-byte floating point
value
Data type
Percent (0..100%)
Percent (0..100%)
Data type
Percent (0..100%)
Percent (0..100%)
│86
Advertisement
Table of Contents
