Table of Contents
Advertisement
3
Setup and function
Fig. 1:
Product overview
[1] Support ring (not included in scope of delivery)
[2] Flush-mounted insert
[3] Cover frame (not included in scope delivery)
[4] Cover plate (not included in scope of delivery)
The room temperature controller senses the current room temperature and regulates the
heating or cooling. The room temperature controller also serves to control two-/four-pipe
systems (2-/4-pipe fan coil units) and conventional air-conditioning units.
Additionally, further switch-control telegrams can be sent to KNX actuators to activate a
connected ventilation fan.
Hotel management systems can gain direct access to the room temperature controller via KNX
and activate controllers in the room. The fan speed level can also be selected manually via
buttons (forced operation). This makes it possible to very quickly adjust the temperature in a
hotel room to the individual wishes of the guests. The device supports the full function for
international hotel applications. It can function in the operating modes "heating and cooling",
"heating" or "cooling" and each one optionally with an additional stage.
For operation and display, the room temperature controller is equipped with push-buttons. An
LCD display serves to indicate the current operating states and values. The use of simple icons
on the buttons and in the display allow the room temperature controller to be operated easily
and intuitively.
The devices must be parameterised for the use of the functions.
The integrated bus coupler makes possible the connection to the bus line.
KNX Technical Reference Manual 1473-1-8914 / 2CKA001473B8914
Setup and function
│13
Advertisement
Table of Contents
