Ingenico Move/5000 Quick Reference Manual page 17

2. The Communication Base requires the close proximity of a
power outlet.
3. The Communication Base requires that an Ethernet cable be
plugged into the proper port.
4. Two (2) Communication Bases cannot be placed within two
meters (6.5 feet) of each other. Additional Communication
Bases should be placed as far as possible from other installed
Communication Bases – on the opposite side of the dining
room, for example.
5. Handsets and Communication Bases should stay where they
can be monitored by the staff.
For Bluetooth Set-up
1. At the home screen, press the administrator [.,#*] key or tap
ADMIN on Home Screen for the administrator menu
2. Tap Setup Menu
3. Key in the administrator name and password, and then press
[Enter]
4. Press [2] - Communications
5. Press [5] - Bluetooth
6. Press [1] - New Base, [2] - Select Base, [3] - Remove Base,
[4] - Remove All Bases or [5] - Print Bases
7. Select [1] - New Base, the terminal needs to be docked on the
base otherwise Dock the terminal on the base will be
displayed onscreen
8. Terminal will synchronize with base and display "Base
Association OK" if the base registration is successful
NOTE:
Bluetooth Connectivity icons are displayed at the top left of the
screen:
Only one (1) Communication Base can be
associated with a handset at a time. Therefore
removing associated bases needs to be
completed before adding a new one.
17