Titan TTK587GD0 Safety And Operating Manual page 5

PRUNER
Chain oil tank
Saw chain speed
Max. cutting length
Guide bar length
Guide bar type
Saw chain type
Chain pitch
Chain gauge (thickness of drive links)
Drive sprocket (teeth and pitch)
Noise values
Sound pressure level L
Sound pressure level L
Sound pressure level L
Uncertainty
Sound power level L
Sound power level L
Sound power level L
Uncertainty
Guaranteed sound power level L
Hand arm vibration
Front handle a (at idling)
h
Rear handle a (at racing)
h
Front handle a (at idling)
h
Rear handle a (at racing)
h
Uncertainty
The declared vibration value has been measured in accordance with a standard test method
and may be used for comparing one tool with another.
The declared vibration value may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the tool can differ from
the declared value depending on the ways in which the tool is used. Identify safety
measures to protect the operator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger
time).
The sound intensity level for the operator may exceed 85dB(A) and ear protection measures
are necessary.
25CC PETROL MULTI TOOL TTK587GDO
pA,Id
pA,R
pA,av
WA,ld
WA,R
WA,av
WA
150 ml
21 m/s
180 mm
203 mm
552912
91PJ033X
9.525 mm (3/8")
1.27 mm (0.050")
6 teeth x 9.525 mm(3/8")
77.5 dB(A)
97.3 dB(A)
94.3 dB(A)
3 dB(A)
87.9 dB(A)
109.1 dB(A)
106.1 dB(A)
3 dB(A)
112 dB(A)
6.303 m/s²
13.254 m/s²
6.954 m/s²
9.901 m/s²
1.5 m/s²
23