Titan TTK587GD0 Safety And Operating Manual page 10

1. Make sure the guide bar (D7) and the saw chain (D6) are in place when you check the oil
delivery.
2. Start the engine; keep it running at medium power and check if the chain oil is delivered as
shown in the figure. (See Fig. 13c)
Pole Extension Attachment Assembly
Follow the same steps as the Brush cutter/grass trimmer attachment assembly (page 28) to
attach the pole extension to the main unit.
NOTE: Use the pole extension only together with pruner attachment (D). It may not be used
with the brush cutter/grass trimmer/hedge trimmer accessories.
HARNESS
The harness (A8) helps the operator carry this product.
WARNING! Always attach the product to the harness. Do not carry it just by hand!
1. To remove the harness from the loop, open the securing clip (A10).
2. Place the harness so that it runs over the left and right shoulder, crossing the chest and
back. The securing clip must be located at the right hip. (See Fig. 14a, 14b)
32
25CC PETROL MULTI TOOL TTK587GDO
Fig. 14a
Fig. 13c
Fig. 14b