Fuel And Engine Oil - Titan TTK587GD0 Safety And Operating Manual

4. OPERATING INSTRUCTIONS

FUEL AND ENGINE OIL

This product is equipped with a 2-stroke engine, the fuel and oil tank are combined and it is
essential to fill a fuel-oil mixture before operating this product. Observe the technical
specifications for suitable fuel and engine oil.
WARNING! This product is not supplied with fuel-oil mixture in the engine! Before
operating this product it is essential to fill it with fuel!
WARNING! Fuel and oil are highly inflammable! Fumes will explode if lit! Ensure that
there are no naked flames around the product! Do not smoke while filling fuel and oil!
1. Place the product on a stable, level surface. We recommend laying a non-flammable
sheet under the product.
2. Mix a regular-grade unleaded petrol and a quality engine oil for air cooled 2 stroke
engines in a suitable container.
3. Use an anti-oxidant added quality oil expressly labelled for air-cooled 2 stroke engine use
(JASO FC GRADE OIL or ISO EGC GRADE). Do not use BIA or TWC (2 stroke water-
cooling type) mixed oil.
4. The recommended mixing ratio for petrol : oil is 40:1. (See Fig. 17)
5. Unscrew and remove the fuel tank cap (A6).
6. Fill correctly mixed fuel/oil into the tank using a fuel funnel (NO SUPPLIED) fitted with a
filter to avoid debris entering the tank. Do not overfill. Leave a minimum 5 mm of space
between the top of the fuel and the inside edge of the tank to allow for expansion. (See
Fig. 18a, 18b)
7. Avoid spilling and overfilling the tank.
8. Wipe up spilled fuel with a soft cloth and refit the fuel tank cap (A6).
9. Always dispose of fuel, used oil and soiled objects according to local regulations (see
section "Environmental Protection").
34
25CC PETROL MULTI TOOL TTK587GDO
Fig. 17
Fig. 18a
Fig. 18b