Titan TTK587GD0 Safety And Operating Manual page 17

4. Never stand directly under the limb you are sawing. Objects may fall different than
expected. Always position yourself out of the path of falling limps. (See Fig. 31c)
5. Keep other persons away from cutting end of product and at a safe distance from the
work area. Maintain a minimum distance of 10m to bystanders. (See Fig. 31d)
WARNING! Never climb into a tree to prune! Do not stand on ladders, platforms,
logs, or in any position which may cause you to lose your balance or control of the
product! When pruning trees, it is important not to make the flush cut next to main
limb or trunk until you have cut off the limb further out to reduce the weight! This
prevents stripping the bark from the main member!
6. Never stand on a ladder or other type of unstable support while using the product.
Insecure stand invites hazards. (See Fig. 31e)
WARNING! This product has not been designed to provide protection from electric
shock in the event of contact with overhead electric lines! Therefore do not use
product near cable, electric power or telephone lines. Keep a minimum distance of
10 m to all electric lines. (See Fig. 31f)!
Fig. 31c
7. Use the product only with secure footing. Hold the product at the right-hand side of your
body.
8. Do not operate the product with arms fully extended or attempt to cut areas which are
difficult to reach.
9. Keep a firm, steady pressure on the product while working with it. Do not try to force the
product through the wood, let the cutting device do the work, using the gripping teeth to
apply minimal leverage pressure.
10. Beware when reaching the end of the cut. The weight of the product may change
unexpectedly as it cuts free from the wood. Accidents can occur to the legs and feet.
Always remove the product from a wood cut while it is running.
25CC PETROL MULTI TOOL TTK587GDO
Fig. 31b
Fig. 31d
Fig. 31e Fig. 31f
45