Starting Instructions - Titan TTK587GD0 Safety And Operating Manual

NOTE: Fuel and oil deteriorate over time. It may be difficult to start the engine if you use fuel
which has been kept for more than 30 days. Towards the end of the season, it is
advisable to put only as much fuel in the tank as you need for each mowing of the lawn,
since it should be completely used up before storing the product. Empty remaining fuel
from the tank when storing the product for over 30 days.

STARTING INSTRUCTIONS

Cold Start
1. Place the product on a flat, stable surface. Ensure that the attachment in use does not touch
the ground or any objects.
2. Set the ignition switch (A19) to its on position "I". (See Fig. 19)
3. Press the primer (A4) 5-6 times until the fuel is visible. Move the choke lever (A3) to the
position. (See Fig.20a, 20b)
4. Hold the product stable and pull the recoil starter handle (A7) firmly; repeat until the engine
starts. (See Fig. 20c) Allow the recoil starter rope to return slowly and controlled after each
pull!
25CC PETROL MULTI TOOL TTK587GDO
Fig. 20a
Fig. 19
Fig. 20c
Fig. 20b
35