Titan TTK587GD0 Safety And Operating Manual page 15

Pruner
Angle adjustment
Adjust the attachment angle continuously to fit the growth of the plant.
1. Press the locking lever (D8) downward and hold it in position. (See Fig. 30a)
2. Adjust the pruner head to required position and then release the locking lever (D8). (See
Fig. 30b)
WARNING! Ensure the locking lever returns to its initial position! To test if the unlock
lever is properly engaged try to move the pruner head! It may not be possible to adjust
the angle!
25CC PETROL MULTI TOOL TTK587GDO
Fig. 29d
Fig. 30a
Fig. 30b
43