Mitsubishi Electric LE7-40GU Instruction Manual page 21

Setting with GT Designer3 (GOT2000)
1.
Obtain the "Screen package data for CC-Link IEF Basic" from your local Mitsubishi Electric representative.
2.
Open the "Screen package data for CC-Link IEF Basic" in GT Designer3 (GOT2000) and change the settings of
[Common] - [Controller Settings] - [CH2] as follows.
For details on the communication settings in GT Designer3 (GOT2000), refer to the following.
GOT2000 Series Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals)
<Controller Setting>
Setting name
Manufacturer
Controller Type
I/F
Driver
<Detail setting>
Property
GOT Net No.
GOT Station
GOT Communication Port No.
3.
Change the settings of [Common] - [GOT Ethernet Setting] - [GOT IP Address Setting] as follows.
For details on the communication settings in GT Designer3 (GOT2000), refer to the following.
GOT2000 Series Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals)
<GOT IP Address Setting>
Setting name
GOT IP Address
4.
Transfer the "Screen package data for CC-Link IEF Basic" to LE7-40GU with GT Designer3 (GOT2000)
For more information on data transfer, refer to the following.
Page 14 COMMUNICATION WITH A PERSONAL COMPUTER (GT DESIGNER3, DATA TRANSFER TOOL)
5.
Select "CC-Link IEF Basic" on the "Ethernet communication selection" screen of the LE7-40GU screen.
6.
Restart LE7-40GU.
Setting detail
CLPA
CC-Link IE Field Network Basic
Ethernet:Multi
Ethernet(CC-Link IE Field Network Basic)
Value
0 (Not used)
0 (Not used)
61450 (Fixed)
Setting value
192.168.3.18 (optional)
3 CC-LINK IE FIELD NETWORK BASIC COMMUNICATION
3.2 Communication Setting
3
19