Start The Control - Danfoss ADAP-KOOL AK-PC 783 Design Manual

First start of control - continued

Start the control

1. Go to Start/Stop display
Press the blue manual control button at the bottom of the
display.
2. Start control
AK-PC 783 Capacity controller RS8GN202 © Danfoss 11-2013
Press in the field against Main switch.
Select ON.
The controller will now start controlling the compressors and the fans.
Note:
Control does not start until both the internal and external switch are
"ON".
Any external compressor stop breaker must be ON for the compressors
to start.
89