Table of Contents
Advertisement
Configuration - continued
Lock configuration
1. Go to Configuration menu
2. Select Lock/Unlock configuration
3. Lock Configuration
The controller will now make a comparison of selected func-
tions and define inputs and outputs. The result can be seen in
the next section where the setup is controlled.
AK-PC 783
Capacity controller RS8GN202 © Danfoss 11-2013
Press in the field against Configuration lock.
Select Locked.
The setup of the controller has now been locked. If you subsequently
want to make any changes in the controller's setup, remember first to
unlock the configuration.
79
Advertisement
Table of Contents
