Danfoss ADAP-KOOL AK-PC 783 Design Manual page 85

Check of settings - continued
7. Move on through all the individual displays for the
condenser group.
Change displays with the +- button. Remember the settings at
the bottom of the pages – the ones that can only be seen via
the "Scroll bar".
8. Safety limits
9. Go back to the overview and Move on to the ther-
mostat group
Check the settings.
10. Go back to the overview and Move on to the press-
sostat group
Check the settings.
11. Go back to the overview and on to the general
alarm inputs
Check the settings.
12. The controller setup has been completed.
AK-PC 783 Capacity controller RS8GN202 © Danfoss 11-2013
The last page contains safety limits and restart times.
85