Henny Penny 600 Service Manual page 91

B B
C C
6. Do the following:
A. If replacing Teflon seals, or complete valve, proceed to step 7.
B. If not, assemble the core-disc in reverse order of disassembly. Assemble valve
core and blade (6), with the smooth side of the hole towards the disc spring
guide (9). Refer to step 8.
7. A repair kit (Part No. 17120) is
available if any of the seals need to be
replaced. If any of the seals are
defective, all seals should be replaced.
NOTICE : Remove the solenoid body
from the fryer to replace seals. Refer to
exploded view of solenoid in figure 3-14
to help identify all parts.
A. Remove back cover.
B. Loosen both conduit and exhaust
fittings.
C. Remove nipple from solenoid body.
77