Henny Penny 600 Service Manual page 81

NOTICE:
Use a magnet to remove the ball seat. Inspect and replace if necessary.
1 1 3 3 ) )
Install the acme nut and limit stop collar. Lubricate the acme nut with special
1 1 4 4 ) )
grease (Part No. 12124).
Thread the limit stop assembly into the limit stop collar.
1 1 5 5 ) )
Lubricate the spindle with special grease. (Part No. 12124) every 30 days.
1 1 6 6 ) )
When reinstalling the locking pin, be certain it is put back
in its original position. The angled side of the pin should
be to the right.
67