Henny Penny 600 Service Manual page 13

person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
This appliance is not intended to be operated by means of an external timer or a
separate remote control system.
This appliance must be installed in accordance with the manufacturer's instructions
and the regulations in force and only used in suitably ventilated location. Read the
instructions fully before installing or using the appliance.
This appliance must be installed with suitable ventilation in accordance with the
manufacturer's instructions and the regulations in force to prevent the occurrence of
unacceptable concentrations of substances harmful to health. Proper air flow is
essential to permit efficient removal of the steam exhaust and frying odors. Air flow for
this model is 33.3 cfm (56.6 m3/h) of air flow.
For gas appliance installations in South Africa, the installation shall be carried out by a
registered installer, and the installation shall comply with requirements of SANS
10087-1 or SANS827 as applicable.
W W A A S S T T E E E E L L E E C C T T R R I I C C A A L L A A N N D D E E L L E E C C T T R R O O N N I I C C E E Q Q U U I I P P M M E E N N T T ( ( W W E E E E E E ) ) As of August
16, 2005, the Waste Electrical and Electronic Equipment directive went into effect for
the European Union. Our products have been evaluated to the WEEE directive. We
have also reviewed our products to determine if they comply with the Restriction of
Hazardous Substances directive (RoHS) and have redesigned our products as
needed in order to comply. To continue compliance with these directives, this unit
must not be disposed as unsorted municipal waste. For proper disposal, please
contact your nearest Henny Penny distributor.
Technical Data For CE Marker Products
Nominal Heat Input (Net): Natural (I ) = 21.1 kW (72,000 Btu/h)
2H
Natural (I ) = 21.1 kW (72,000 Btu/h)
2E
Natural (I ) = 21.1 kW (72,000 Btu/h)
2E+
Natural (I ) = 21.1 kW (85,000 Btu/h)
2L
Natural (I 2(43.46-45.3 MJ/m 3 (0°C))
(72,000 Btu/h)
Liquid Propane (I ) = 21.1 kW (72,000 Btu/
3P
h)
) = 21.1 kW
xi