2.
To enter into OneKey Cali interface, press
3.
To select target tools, do the following:
–
Press ↑ / ↓ → Enter.
–
Press F6, and select all tools.
–
Press F6, and remove all selected tools.
4.
To start instant calibration, press F1.
The system automatically changes the tool and start to calibration.
6 System Management
Through this section, you can quickly know the following operations for system
management:
•
Register the system.
•
Switch the system language.
•
Maintain the system.
•
Use NcCloud Assistant.
•
Set the network.
上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
→ =:
49 / 52