Table of Contents
Advertisement
1.2.1.1 Main Function Buttons
They are used to switch to the following functional areas:
•
: to enter into State functional area.
•
: to enter into Advanced functional area.
•
: to enter into Program functional area.
•
: to enter into Parameter functional area.
•
: to enter into System functional area.
1.2.1.2 Alpha-numeric Keypad
It consists of the set of keys for operating the integrated CNC system. And its use is
generally the same with that of the computer keyboard, except the following:
•
Enter an alphabet
–
For NK260, directly press the button to enter the alphabet on the left-
upper part, and press Shift and an alphabet key to enter the alphabet on
the right-lower part.
–
For NK280 / NK280B, the opposite is true.
•
Numeric keys are used as axis direction keys in Manual mode.
–
Only press the axis direction key to move the axis at jog speed.
–
Press the axis direction key and numeric key 5 together to move the axis
at rapid jog speed.
上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
6 / 52
Hide quick links:
Advertisement
Table of Contents
