Save And Recover Coordinates - WEIHONG 200 Series Manual

– To check logs about running status, press F3. Logs with icon
Log interface.
– To check warning logs, press F4. Logs with icon
– To check error logs, press F5. Logs with icon
– To check system logs, press F6. Logs with icon
You can also do the following in Log interface:
• To delete all system logs, press F7.
Note: Please delete system logs regularly. Otherwise, too many log files will slow down the system.
• To export system logs to a USB flash disk, press shift and L.

5.5 Save and Recover Coordinates

This operation is used to keep the workpiece offsets for later use and get back the
previously saved workpiece offsets to save the trouble of repeatedly setting the
workpiece offsets.
To save and recover coordinates, do the following:
1. To enter into Coor Backup interface, press
上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
show in Log interface.
→ X:
42 / 52
show in
show in Log interface.
show in Log interface.