WEIHONG 200 Series Manual page 24

2. To enter into Centering interface, press
3. To enter into Center page for line centering, press T.
4. Press 4 / 6, move X-axis to one side of the workpiece, and press F1. The system
automatically records the machine coordinate of the current point.
5. Press 4 / 6, move X-axis to the other side of the workpiece, and press F2. The
system automatically calculates the midpoint coordinate based on the
coordinate of the current position and records in the last step, and sets it as the
workpiece origin.
上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
→ B:
24 / 52