Filling Through Tank Lid; Filling Of Rinsing Tank; Filling Of Clean Water Tank - Hardi COMMANDER TWIN FORCE Instruction Book

Filling through tank lid

Water is filled into the tank by removing the tank lid located at front of the sprayer tank which is accessible from the platform.
It is recommended to use as clean water as possible for spraying purposes. Always fill water through the strainer basket to
prevent foreign particles from entering the tank. An overhead tank can be used in order to obtain high filling capacity.
±
WARNING! Do not let the filling hose enter the tank. Keep it
outside the tank, pointing towards the filling hole. If the hose is
led into the tank and the water pressure drops at the water
supply plant, chemicals may be siphoned back and contaminate
the water supply lines, plant and well.
±
WARNING! The water supply line should be provided with a check
valve as additional safety precaution. Follow local legislation in
force at any time.
±
WARNING! The water supply should be provided with a meter to avoid spillage by over-filling. Follow local legislation
in force at any time.

Filling of rinsing tank

The rinsing tank is filled via the 1" threaded connection piece at the valve system:
1. Remove the filler cap, then fit the external water hose to the threaded connection piece.
2. Engage external water pump, if any.
3. Keep an eye on the level indicator in order not to overfill the tank.
4. Stop filling and refit the cap.
Capacity: approximately 450 litres.
ATTENTION! Only fill rinsing tank with clean water! To avoid algae developing in the rinsing tank always drain the
rinsing tank if the sprayer is not in use for a longer period of time.
ATTENTION! For cleaning purposes etc. the rinsing tank is also accessible via the tank lid on top of tank.

Filling of clean water tank

To fill the clean water tank:
1. Remove the tank lid
2. Fill with clean water
3. Reposition the tank lid.
For use of water:
• Turn the ball valve lever to open. The ball valve is located on the
valve cover.
The water from this tank is for hand washing, cleaning of clogged
nozzles etc. Only fill the clean water tank with clean water from the well.
±
WARNING! Although the clean water tank is only filled with clean water, this water must NOT be used for drinking.
5 - Operation
63