Filling Through Tank Lid - Hardi ALPHA EVO II EcoDrive Instruction Book

Filling Through Tank Lid

The tank lid is provided with a hinge (1) so it can be lifted. A locking system (2) prevents it from being opened.
Opening:
• Unlock and turn the lid anticlockwise then lift.
Closing:
• Put the lid down and turn it clockwise, then lock it.
÷
NOTE! The lid filter should always remain in place to avoid
impureties falling into the tank.
÷
NOTE! The tank lid should always be locked before moving the
vehicle.
Water is filled into the tank by removing the tank lid, which is located at
the top of the sprayer tank near the front, which is accessible from the
platform top of the tank on the sprayer's left side. Always fill water
through the strainer basket to prevent foreign particles from entering
the tank. An overhead tank can be used in order to obtain high filling
capacity.
Water is filled into the tank by removing the big tank lid, which is located
at the top of the sprayer tank near the front, which is accessible from the
platform top of the tank on the sprayer's right side. It is recommended
to use as clean water as possible for spraying purposes. Always fill water
through the strainer basket to prevent foreign particles from entering
the tank. An overhead tank can be used in order to obtain high filling
capacity.
±
WARNING! Do not let the filling hose enter the tank. Keep it outside the tank, pointing towards the filling hole. If the
hose is led into the tank, and the water pressure drops at the water supply plant, chemicals may be sucked back and
contaminate the water supply lines, supply plant and supply well.
±
WARNING! The water supply line should be provided with a check valve as additional safety precaution. Follow local
legislation in force at any time.
±
WARNING! The water supply should be provided with a water meter to avoid spillage by overfilling. Follow local
legislation in force at any time.
5 - Operation
1
2
OPEN
CLOSE
F
FERMETURE
CLOSE
O
OUVERTURE
OPEN
117