Table of Contents
Advertisement
5 - Operation
Filling of Water
The tank should normally be filled 1/3 with water before adding
chemicals. Always follow the instructions given on the chemical
container!
±
WARNING! If the sprayer is put aside with liquid in the MainTank,
all manifold valves must be closed.
Filling the MainTank Through Tank Lid
Water is filled into the MainTank by removing the big tank lid, which is located at the top of the sprayer. The tank lid is
accessible from the footboard. It is recommended to use as clean water as possible for spraying purposes. Always fill water
through the strainer basket to prevent foreign particles from entering the tank. An overhead tank can be used in order to
obtain high filling capacity.
±
WARNING! Do not let the filling hose enter the tank. Keep it
outside the tank, pointing towards the filling hole. If the hose is
led into the tank, and the water pressure drops at the water
supply plant, chemicals may be sucked back and contaminate
the water supply lines, supply plant and supply well.
The water supply line should be provided with a check valve as
an additional safety precaution. Follow local legislation in force at
any time.
The water supply should be provided with a water meter to avoid
spillage by overfilling. Follow local legislation in force at any time.
82
Advertisement
Table of Contents
