Clean Water Tank; Rinsing Tank; Filters; Easyclean Filter - Hardi COMMANDER TWIN FORCE Instruction Book

Clean water tank

The water in this tank is for hand washing, cleaning of clogged nozzles
etc. Only fill this tank with clean water from the well.
Capacity: approximately 20 litres.
±
WARNING! Although the clean water tank is only filled with clean
water, this water must NOT be used for drinking.

Rinsing tank

A rinsing tank is mounted to the rear of the sprayer. The tank are made of impact-proof and chemical resistant polyethylene.
Filling is done via the 1" threaded stud placed in the working area. The rinsing tank level indicator is placed at the platform.
Nominal content: approximately 450 litres.

Filters

A EasyClean suction filter is fitted in the working zone.
A Cyclone pressure filter is fitted to the sprayers right side just in front of the hose reel, hidden behind the right front cover.
It has a built-in self-cleaning function.
In-line pressure filters can be fitted at each boom section as an option (standard for certain booms).
Nozzle filters are fitted at each nozzle.
All filters should always be in use and their function checked regularly. Pay attention to the correct combination of filter and
mesh size (see "Spray Technique" book).

EasyClean filter

To ensure proper function of filter and its built-in valve the filter must be
opened at least 1 time per month. A label on the lid also designates this.
• To open filter then turn it counterclockwise and pull it up, like
shown on picture.
• Pull out the two locks (A) to remove filter element from the lid.
Beside the spray pressure gauge on the platform a EasyClean clogging
indicator is located:
Clogging indicator colour
Green indicator.
Yellow indicator.
Red indicator.
Filter status
No cleaning necessary.
It is possible to finish an ongoing spraying job and
then clean filter afterwards.
Clean EasyClean filter immediately as filter is
clogged.
3 - Description
21