Twin Air Technique; Twin Operation - Hardi COMMANDER TWIN FORCE Instruction Book

TWIN Air technique

TWIN operation

The air speed and angling must always be adjusted individually for each spray job and the given weather conditions.
The buttons on the SetBox controls the following:
1. Power ON/OFF
8. TWIN presets
14. TWIN angling
15. TWIN air volume (fan speed)
ATTENTION! For function of other switches see "SetBox controls"
on page 29.
Pressing the buttons (14)
• Air slot and nozzle assembly can be angled in steps zero to 4 backwards and from zero to 6 forwards, which is
corresponding to approx. 30° backwards and 40º forwards compared to vertical position. Regarding adjustments - see
section on "Air technique".
Pressing the buttons (15)
• Air speed can be adjusted in steps from zero to 10. The blower revolutions can be viewed in the controller display. The
max. revolutions for the fan is 3100 r.p.m., which will give full air speed of approximately 40 m/s. When booms are half-
folded, reduce r.p.m. or pressure with 25% to obtain the same performance (air speed at nozzles).
5 - Operation
61