Maintenance; Lubrication; General Info; Recommended Lubricants - Hardi COMMANDER TWIN FORCE Instruction Book

Lubrication

General info

Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt and
condensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly before
lubricating. Avoid skin contact with oil products for longer periods.
Always follow the quantity recommendations. If no quantity is recommended, feed lubricator till new grease becomes
visible.
Pictograms in lubrication & oiling plans designate the following:
1. Lubricant to be used (see "Recommended lubricants").
2. Recommended intervals (hours).
ATTENTION! If the sprayer is cleaned with a high pressure cleaner,
lubrication of the entire machine is recommended.

Recommended lubricants

BALL BEARINGS:
Universal Lithium grease,
NLGI No. 2
SHELL RETINAX EP2
CASTROL LMX GREASE
HYDROSTATIC FAN
TRANSMISSION:
Hydraulic oil type ISO VG 46,
DIN 51524-2 HLP norms.
SHELL TELLUS T46 (factory
use)
P.T.O. lubrication & oiling plan
Serie 100 type P.T.O. shaft
SLIDE BEARINGS:
Lithium grease with
Molybdenumdisulphide or
graphite
SHELL RETINAX HD 2 (or HDX 2)
GEARBOX:
Transmission oil SAE 80W-90

6 - Maintenance

OIL LUB. POINTS:
TOTAL Transmission TM
SAE 80W/90
Castrol EPX 80W/90
SHELL Spirax 80W/90
Mobil Mobilube 80W/90
C-50
81