Equipment; Manualtrack; Intellitrack; Driving Technique For Intellitrack - Hardi NAVIGATOR DELTA FORCE Instruction Book

Hide thumbs Also See for NAVIGATOR DELTA FORCE:
Table of Contents

Advertisement

3 - Description

Equipment

ManualTrack

The ManualTrack is used for track correction on slopes, making the sprayer drive a little uphill and follow the track of the rear
tractor wheels. The ManualTrack can easily be operated with a toggle switch in the hydraulic control unit.

IntelliTrack

The IntelliTrack will make the sprayer automatically follow the tractors back wheels, when turning on headland. The
IntelliTrack can easily be operated with the hydraulic control unit. IntelliTrack has an integrated safety feature which prevents
oversteering, when the driving speed is too high for the given turning radius. If a TankGauge is fitted, the tank filling level is
also taken into account.
The IntelliTrack is limited to speeds below 15 km/h. Driving in "Auto" with IntelliTrack will trigger an overspeed alarm, and
the sprayer will automatically align.
±
WARNING! During road transport the drawbar must be aligned in centre position and mechanically locked - see
"Tracking Drawbar Transport Lock" on page 67. Refer to the Controller instruction book for specific instructions.
÷
NOTE! IntelliTrack requires a controller. More information about the controller can be found in the separate instruction
book.

Driving Technique for IntelliTrack

A trailer with IntelliTrack behaves differently than a standard trailer. In
tracking position, the sprayer's centre of gravity is displaced more
outwardly compared to the centre line of a standard trailer.
Compared to a standard trailer, a steered trailer has decreased stability
when turning, especially when turning on hillsides (B).
To prevent overbalancing, pay attention to these guidelines:
• Avoid sudden tight turns.
• Slow down before entering a curve or turning. Drive with a
constant, low speed during the turn.
• Never slow down too fast, never brake heavily and never stop
suddenly in a curve, or when turning on a hillside, when the
sprayer is articulated.
• Be careful when turning on uneven ground.
• Set the track width (A) as wide as possible.
• The proper function of the hydraulic system is essential to obtain good stability.
• A filled rinsing tank will increase the stability slightly.
DANGER! No persons are allowed in the operation area of the sprayer, when steering is unlocked!
±
WARNING! Never articulate steering, when the boom is in transport position.
60

Advertisement

Table of Contents
loading

Table of Contents