Setup - NEC NP-02HD Installation Manual

LCD Menu
Douser Count
Resets the number of times the douser has been used. Press the ENTER button, then select "Yes" in the displayed confirmation
screen, and then press the ENTER button to reset the number of times the douser has been used.

4-3-4. Setup

This menu is for service personnel. For the procedure to use it, refer to "4-1-1. When You Use the Service Personnel Menu" (page
121).
Douser Setup
Sets the douser open/close state.
Open(Power On)
Light On
Title Select
Panel Key Lock
The control buttons on your projector are locked to be inoperative.
Lock
Unlock
When the buttons on the projector's control panel are locked, press the EXIT button on the projector for about 10 sec.
NOTE
to unlock them (The key lock setting on the projector becomes Unlock).
126
← Press the ENTER button to display the confirmation screen.
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
When set to Enable, the douser opens after the projector starts up.
When set to Enable, the douser opens when the light source is turned on.
When set to Enable, the douser opens when a title is selected.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Enable a lock on the control buttons on your projector.
Disable the lock on the control buttons.