Projector Adjustment and Connecting
3-8. Connecting the Various Control Terminal
For control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45).
PC control terminal (RS-232)
Ethernet port (LAN)
PC
This completes the adjustment and connection of the projector. Next, set up the projector from the DCC. Refer to the "Digital
Cinema Communicator v2 Installation Manual" for the procedure.
112
Use this terminal when controlling the projector in serial connection from a PC. Use a retail
RS-232C straight cable for the connection between the projector and the computer.
Use this port when controlling the projector in LAN connection from a PC or a cinema
server. Use a retail LAN cable (10/100Base-T) for the connection between the projector and
the computer after checking with your network administrator.
RS-232C
LAN
RS-232C
LAN cable
Network hub/Router
LAN cable
Cinema server