Projector Adjustment And Connecting; Flow Of Adjustment And Connecting - NEC NP-02HD Installation Manual

3. Projector Adjustment and Connecting

3-1. Flow of Adjustment and Connecting

Adjustment and Connecting of the projector accord to the procedure below.
• Step1
Turning Your Projector On (See page 106)
• Step2
Setting The Date and Time in the Projector (See page 107)
Setting the date of installation of the projector (See page 107)
• Step3
Setting the Projector Projection Method (See page 108)
• Step4
Adjusting the Lens (See page 109)
Display the test pattern to adjust the screen size, screen angle and focus.
• Step5
Connecting with the Image Input Port (See page 111)
• Step6
Connecting the Various Control Terminal (See page 112)
This chapter explains the adjustment and connection of the projector with Steps 1 to 6.
Steps 1 to 6 complete the adjustment and connection of the projector. Next, carry out various settings such as color adjustment
using DCC. Refer to the "Digital Cinema Communicator v2 Installation Manual" for the procedure.
102