NEC NP-02HD Installation Manual page 96

Setting Up Your Projector
4
Mount the lens unit to the lens mount
of the projector.
(1) Align the guide slit of the lens mount with the
position of the pin on the lens unit.
(2) Slowly insert the lens unit into the lens mount.
While doing this, try to connect the lens unit's
connector with the lens mount's lens control
connector.
(3) Rotate the release lever counterclockwise in the
downward direction to lock the lens unit.
5
Use the fall prevention metal fitting to
fix the lens unit.
(1) Tighten the screws (at two points).
96
Lens control connector
Pin
Loosen these screws.
Lens mount
Guide slit