NEC NP-02HD Installation Manual page 145

Error Code
1702 SensorFail LD1-Y1
1703 SensorFail LD1-Y2
1704 SensorFail LD1-Y3
1705 SensorFail LD1-Y4
1706 SensorFail LD2-B
1707 SensorFail LD2-Y1
1708 SensorFail LD2-Y2
1709 SensorFail LD2-Y3
1710 SensorFail LD2-Y4
1711 SensorFail PW1
1712 SensorFail LD1-R
1713 SensorFail LD2-R
1714 SensorFail PW2
1719 SensorFail DMD-R
1720 SensorFail DMD-G
1721 SensorFail DMD-B
1722 SensorFail FIP AIR
2000 IntegrityFail
2001 LD Y Stop
2002 LD B Stop
2004 LD R Stop
2010 Incorrect power-off
2015 Douser Open Fail
2017 Douser Close Fail
2217 TEC-R Fail
2219 TEC-G Fail
2221 TEC-B Fail
2280 PW1 OverTemp
2281 PW2 OverTemp
2282 Admin. Key Off
2283 BANK-U OverTemp
2284 BANK-D OverTemp
2285 RED-U OverTemp
2286 RED-D OverTemp
2301 LU Hardware Mismatch
2302 LU ColorSensor Fail
2304 OPT-EEPROM Warning
2305 OPT-EEPROM Comp.Fail
2306 OPT-EEPROM Fail
2400 LU warranty temp over
2500 LU License has expired
2501 LU License will expire soon
2502 LU License Auth Error
2503 LU License Brightness Warning
2504 LU License Brightness Low
Error message
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Temperature sensor read error.
Integrity error with the internal software code of the projector.
* When this error has occurred, the projector will not accept any external
demands. Communication with external devices will not be performed
either.
The light source(Yellow) is not on.
The light source(Blue) is not on.
The light source(Red) is not on.
PowerOff was not performed correctly last time.
Douser open fail.
Douser close fail.
TEC(Thermoelectric Cooler) for Red is failed.
TEC(Thermoelectric Cooler) for Green is failed.
TEC(Thermoelectric Cooler) for Blue is failed.
Light unit over temperature.
Light unit over temperature.
The administrator key is turned off.
Light unit over temperature.
Light unit over temperature.
Light unit over temperature.
Light unit over temperature.
Installed Light Unit id verification is failed.
Color sensor in light unit is failed.
PWB maintenance data in EEPROM is precaution.
PWB maintenance data in EEPROM is mismatch.
PWB maintenance data in EEPROM is critical error.
Projector ambient temperature is beyond limitation for LU extend warranty
plan.
LU License is expired.
LU License expirired soon.
Installed LU License Authentication failed.
Brightness by guaranteed by LU License is precaution.
Brightness is out of LU License guarantee.
Description
Appendix
145