Table of Contents
Advertisement
Quick Links
Portable Projector
NP06CM Ceiling Mount Unit
Installation and Adjustment Manual
Thank you for your purchase of the NEC Portable projector ceiling mount unit.
Please read this installation and adjustment manual carefully to ensure proper use.
Special skills are required for the installation of the Portable projector.
This work should never be performed by the customer.
To the Dealer and the Installer
For the safety of the customer, we ask that the installation work be started
after careful attention is paid to the strength of the mounting location to be
sure it will withstand the weight of the Portable projector and mounting
hardware.
CONTENTS
Heed the Following ............................................................................2
Preparation..........................................................................................4
List of Packaged Parts.............................................................................4
Names of the Parts...................................................................................5
Dimensions ...............................................................................................6
Guide to Screen Size and Projector Mounting Position .......................6
Mounting the Projector ......................................................................7
Adjustment of the Projection Angle................................................11
Cleaning the filter ...................................................................................14
Specifications ...................................................................................15
PRINTED WITH
SOY INK
Printed on recycled paper.
T M
Printed in Japan
NP06CM-0704K-1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NEC NP06CM
Summary of Contents for NEC NP06CM
-
Page 1: Table Of Contents
NP06CM Ceiling Mount Unit Installation and Adjustment Manual Thank you for your purchase of the NEC Portable projector ceiling mount unit. Please read this installation and adjustment manual carefully to ensure proper use. Special skills are required for the installation of the Portable projector. -
Page 2: Heed The Following
Heed the Following This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems. WARNING • When installing the projector, be sure to •... -
Page 3: Installation Precautions
Do not install the projector in a wall or in a • NEC Display Solutions will not accept any tight place where ventilation is poor, place responsibility related to any accidents or a cover it, etc. -
Page 4: Preparation
Preparation List of Packaged Parts Fixed ceiling part...1 Projector mounting adapter...1 Installation and adjustment manual...1 Terminal cover...1 Projector mounting screws (long M4 screws) ...5 Terminal cover mounting screws (short M4 screws) ...4 Up-down angle adjustment screws (M5) ...4... -
Page 5: Names Of The Parts
Preparation Names of the Parts [Front view] Fixed ceiling part Inclination axis screws ● ● Inclination adjustment screws Projector mounting adapter [Right side view] Left-right angle adjustment Fixed ceiling part screws ● ● Up-down angle adjustment screws Projector mounting adapter... -
Page 6: Dimensions
Preparation Dimensions Fixed Ceiling Part and Lens Center Dimensions Diagram Lens center 117.4 Lens center Fixed Ceiling Part Bolt Hole Position Dimensions Center line of fixed ceiling part 117.4 Lens center Center line of fixed ceiling part Unit: mm Guide to Screen Size and Projector Mounting Position For the distance to the screen and the picture size, see the projector's operating instructions. -
Page 7: Mounting The Projector
Mounting the Projector Attach the Fixed Ceiling Part to the Ceiling First, partially tighten the four nuts, then tighten the nuts firmly after positioning. Fixed ceiling part WARNING! Use M8 bolts for the fixed ceiling part. Use of types other than M8 could cause the projector to fall. - Page 8 Mounting the Projector Suspend the Projector from the Fixed Ceiling Part Slide the slotted part of the projector mounting adapter over the pin of the fixed ceiling part and push all the way to the back. The projector is temporarily suspended in this condition and attention must be paid so that the unit does not fall since it is not fixed in place.
- Page 9 Mounting the Projector After connecting all the cables, mount the terminal cover. Line up the projecting parts of the projector mount adapter with the holes in the included terminal cover, and fasten securely using the four included screws (M4). Line up the projecting parts with the positions of the holes Short screw Line up the projecting parts with...
-
Page 10: Installation Examples
Mounting the Projector Installation Examples When the Ceiling is Wood Construction: Mounting board (Strong enough to support the weight of the whole unit.) Bolt (M8) Washer Beam Nut and washer When the Ceiling is Concrete Construction: Anchor nut (Purchase commercially-available M8-type anchor nuts that are strong enough to endure the weight of the whole unit.) Ceiling Washer... -
Page 11: Adjustment Of The Projection Angle
Adjustment of the Projection Angle Before the Adjustment • Refer to the user's manual of the projector, switch on the power and project an image. • From the menu, select "Setup" ➔ "Installation" ➔"Orientation" and select the projection orientation. Select "Ceiling/Front" when projection is from the front side, and "Ceiling/Rear" when projection is from the rear side. - Page 12 Adjustment of the Projection Angle Adjust the Up-Down Angle Adjust so that the north-south image is projected to the center of the screen, then securely tighten the four up-down angle adjustment screws. 10˚ 10˚ Up-down angle adjustment screws (There are also screws on the opposite side.) Maximum adjustment angle +/-10˚...
-
Page 13: Lens Shift Adjustment
Adjustment of the Projection Angle Lens shift adjustment Move the picture using the projector's lens shift function and adjust so that it fits on the screen. Screen... -
Page 14: Cleaning The Filter
Cleaning the filter To clean the filter of the air intake on the projector's bottom panel, remove the wing nut, then slide the dust cover and remove it. Now insert the tip of a vacuum cleaner and vacuum over the air intake. After cleaning the filter, set the dust cover back in its original position and tighten the wing nut. -
Page 15: Specifications
Specifications Product Name : Projector Ceiling Mount Unit Model : NP06CM Adjustment angle : Up-down angle +/-10˚ Left-right angle +/-10˚ Inclination angle +/-10˚ Dimensions : 497 (W) x 295 (D) x 310 (H) mm (when assembled) Weight : Approximately 3.9 kg Supplied Items : Projector mounting screws (M4) ........5... - Page 16 MEMO...
Need help?
Do you have a question about the NP06CM and is the answer not in the manual?
Questions and answers