Installation - NEC NP-02HD Installation Manual

LCD Menu
Silent Mode
Sets whether the rear (SYSTEM/LIGHT) status indicator, buzzer, indicators on the projector's control panel, illumination, and LCD
screen backlight are enabled or disabled.
Rear LED
Buzzer
Control Button
LCD-Backlight
TIP
When LCD Backlight is set to Disable, you can change the setting to Enable by long-pressing (3 seconds or more)
the EXIT button and UP button.

4-3-5. Installation

This menu is the service personnel menu. For the using service personnel menu, refer to "4-1-1. When You Use the Service Person-
nel Menu" (page 121).
Option Slot
Configures the devices mounted in slot. This menu is active in standby mode only.
IMB
No Board
Orientation
Set the projection method (Image Orient) to match the installation conditions of the projector and screen. Furthermore, set the cool-
ing fan operation (Fan Tilt Setting) to match the installation conditions of the projector.
Normal-F
Normal-R
UpsideDown-F
UpsideDown-R
128
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Sets whether to use or not use the rear (SYSTEM/LIGHT) status indicator.
Enable: Use
Disable: Not use (the rear (SYSTEM/LIGHT) status indicator does not light up)
Sets whether to use or not use the buzzer.
Enable: Use
Disable: Not use (the buzzer does not sound)
Sets whether to use or not use the indicators on the projector's control panel.
Enable: Use
Disable: Not use (the LED next to the buttons do not light up)
Sets whether to use or not use the illumination and LCD screen backlight on the projector's control panel.
Enable: Use
Disable: Not use (turns off the illumination and LCD screen backlight on the projector's control panel)
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Media block (NP-90MS01/NP-90MS02)
No device mounted
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Front projection. With the projector installed on the pedestal, projection is executed from the front of the screen.
Rear projection. With the projector installed on the pedestal, projection is executed from the back of the screen.
Ceiling front projection. With the projector installed on the ceiling, projection is executed from the front of the screen.
Ceiling rear projection. With the projector installed on the ceiling, projection is executed from the back of the screen.