Setting The Projector Projection Method - NEC NP-02HD Installation Manual

Projector Adjustment and Connecting

3-5. Setting the Projector Projection Method

The projection method can be changed in the projector menu. In the factory default settings, it is set to front (installed on a
stand and projecting from the front of the screen).
1
Press the LEFT/RIGHT button to display "Configuration" and press the DOWN button.
2
Press the LEFT/RIGHT button to display "Installation" and press the DOWN button.
3
Press the LEFT/RIGHT button to display "Orientation" and press the DOWN button.
4
Press the LEFT/RIGHT buttons to select the projection method.
When shipped from the factory, it is set to [Normal-F].
Normal-F
Normal-R
UpsideDown-F
UpsideDown-R
5
Press the ENTER button.
An (*) will be put on the selected projection method.
6
Press the EXIT button several times.
The projector exits the menu and goes back to the regular screen.
If you press the EXIT button and then select "Yes" and press the ENTER button on a regular screen, you are returned to
user mode.
108
Front projection. With the projector installed on the pedestal, projection is executed
from the front of the screen.
Rear projection. With the projector installed on the pedestal, projection is executed
from the back of the screen.
Ceiling front projection. With the projector installed on the ceiling, projection is
executed from the front of the screen.
Ceiling rear projection. With the projector installed on the ceiling, projection is executed
from the back of the screen.