Connecting The Image Input Terminals; Connecting The Various Control Terminal - NEC NC1040L-A User Manual

2-3. Connecting the image input terminals

Video signals can be input from external devices by mounting an option board, which is sold separately, in the projector. The
option boards that can be mounted in the projector and the video input ports fitted on each option board are as follows.
Consult your dealer for details on mounting option boards. Refer to the instruction manual of the option board for details on
connecting the option board with external devices.
Model name
NC-80LB01-B
NC-80DS01-B
NP-80DS02
NP-90MS01
(Note 1) NC-80LB01-B supports CineLink
NC-80DS01-B and NP-80DS02 don't support CineLink
(Note 2) NC-80LB01-B and NC-80DS01-B support dual-link connection.
NP-80DS02 supports dual-link connection and quad-link connection.
(Note 3) Supports dual-link connection.

2-4. Connecting the various control terminal

For control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45).
• PC control terminal (RS-232) --------------- Use this terminal when controlling the projector in serial connection from a PC.
• LAN port (LAN) -------------------------------- Use this port when controlling the projector in LAN connection from a PC.
PC
Product name
Signal Input Board (Note 1)
Integrated Media Server
2.
TM
RS-232C
GP I/O
LAN cable
2. Installation and Connection
SDI input terminal
DVI-D input terminal
SDI input terminal
DVI-D input terminal
HDMI input port
SDI input port
2.
TM
3D RS-232
Video input terminal
x 4 (Note 2)
x 2 (Note 3)
x 4 (Note 2)
x 2 (Note 3)
x 1
x 2
REMOTE
LAN
USB
33